Green Seaweed Extract

Page 1

Seaweed Extract
Material Safety Data Sheet
Product and company identification
1 . Common name
Green Seaweed Extract
Material uses : Plant Nutrient (Not for Human Consumption)
In case of emergency -
Supplier/Manufacturer
Seed and Grain Tech. LLC
Pahrump, Nevada 89048
USA Tel. 888-772-6001 FAX 702-920-8717
Conforms to ANSI Z400.1-2004 Standard (United States).
Hazards identification
Routes of entry Potential acute health effects
.Eyes No known significant effects or critical hazards.
Skin No known significant effects or critical hazards.
Inhalation No known significant effects or critical hazards.
Ingestion No known significant effects or critical hazards.
Physical state No known significant effects or critical hazards.
liquid. (Powder + Distilled Water.)
See toxicological information (section 11)
Odor Seaweed (Slight.)
2 . Emergency overview
No specific hazard.
USE WITH CARE.
Follow good industrial hygiene practice.
Potential chronic health effects
Carcinogenic effects : Not classified or listed by IARC, NTP, OSHA, EU and ACGIH.
Mutagenic effects: Not available.
Teratogenic effects : Not available.
Color : Black.
Hazard status This material is classified as not hazardous under OSHA regulations.
Composition/information on ingredients
3 . Name CAS number United States
No hazardous ingredient
First aid measures
4 . Eye contact
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms appear. If inhaled, remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms appear. Check for and remove any contact lenses. In case of contact with eyes, rinse
immediately with plenty of water. Get medical attention if symptoms occur.
Notes to physician
No specific antidote. Medical staff must contact Poison Control Center.
Wash with soap and water. Get medical attention if symptoms occur.
Date of issue


________________________________________
Page 2
Seaweed Extract
Use an extinguishing agent suitable for the surrounding fire.
Fire-fighting measures
Flammability of the product
Extinguishing media
No specific hazard.
Special protective equipment for fire-fighters
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
5 . Special exposure hazards
None known.

Use suitable protective equipment.
If emergency personnel are unavailable, vacuum or carefully scoop up spilled material
and place in an appropriate container for disposal by incineration. Avoid creating dusty
conditions and prevent wind dispersal.
Environmental precautions
Accidental release measures
Avoid dispersal of spilled material, run-off and contact with soil, waterways, drains and sewers.
Personal precautions Methods for cleaning up
6 . Keep container tightly closed. Keep container in a cool, well-ventilated area.
Wash thoroughly after handling.
Handling and storage
Handling
Storage
7 . Exposure controls/personal protection
Personal protection
Consult local authorities for acceptable exposure limits.
8 . Engineering measures
: No special ventilation requirements. Good general ventilation should be sufficient to
control airborne levels. If this product contains ingredients with exposure limits, use
process enclosures, local exhaust ventilation or other engineering controls to keep worker
exposure below any recommended or statutory limits.
Hygiene measures Personal protection in caseof a large spill :
Safety glasses, goggles or face shield. Impervious gloves. Full suit. Boots. Wear NIOSH-
approved self-contained breathing apparatus or equivalent and full protective gear.
Wash hands, forearms and face thoroughly after handling compounds and before eating,
smoking and using the lavatory and at the end of the day. Follow good industrial hygiene
practice.
HMIS Code/Personal protective equipment
A Lab coat.
Disposable vinyl gloves.
A respirator is not needed under normal and intended conditions of product use.
Safety glasses.
Eyes Skin Respiratory Hands
Date of issue : 08/31/2006
Page: 2/4
________________________________________
Page 3
Seaweed Extract
Seaweed (Slight.)
9 . The product is stable.
Reactive with oxidizing materials. Will not occur.
Stability and reactivity
Stability and reactivity
Incompatibility with various
substances
Hazardous polymerization
10 .
None known.
Conditions of reactivity
Toxicological information
11 . No known significant effects or critical hazards.
: Carcinogenic effects: Not classified or listed by IARC, NTP, OSHA, EU and ACGIH. Mutagenic effects: Not available. Teratogenic effects : Not available.
Ecological information
Products of degradation Environmental precautions :
No known significant effects or critical hazards.
12 . Dispose of according to all federal, state and local applicable regulations.
Waste disposal
Disposal considerations
13 .Transport information
14 . Not regulated.
NAERG
Not applicable.
Regulatory information
UN/
Regulatory information
Clean Water Act (CWA) 307: No products were found.
Clean Water Act (CWA) 311: No products were found.
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: No products were found.
SARA 311/312 MSDS distribution - chemical inventory - hazard identification: No products
were found.
United States
15 . HCS Classification
Not regulated.
U.S. Federal regulations
TSCA: No products were found
________________________________________
Page 4
Seaweed Extract
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
International lists
California prop. 65: No products were found.
No products were found.
This product, (and its ingredients) is (are) listed on national inventories, or is (are)
exempted from being listed, Australia (AICS), in Europe (EINECS/ELINCS), in Korea
(TCCL), in Japan (METI), in the Philippines (RA6969).
State regulations
Other information
Hazardous Material
Information System (U.S.A.)
National Fire Protection
Association (U.S.A.)
16 . HMIS RATING
Physical Hazard
Health
0
0
Fire hazard
Personal protection
A
0
ANSI Z400.1, MSDS Standard, 2004. - Manufacturer's Material Safety Data Sheet. -
29CFR Part1910.1200 OSHA MSDS Requirements. - 49CFR Table List of Hazardous
Materials, UN#, Proper Shipping Names, PG.
Notice to reader; To the best of our knowledge, the information contained herein is accurate. However, neither the above named
supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the
information contained herein. Final determination of suitability of any material is the sole responsibility of the user.
All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist.
4- Extreme
3- Serious
2- Moderate
1- Slight
0- Minimal
See section 8 for more detailed
information on personal protection.
HAZARD RATINGS
Date of issue
: 08/31/2006
Page: 4/4

Arugula Sprouting Instructions

Arugula

Sprouting Instructions
Yields approximately as many micro-greens (by weight) as seed "planted"

This is a mucilaginous seed. Do NOT soak it unless you are performing an experiment!

FYI - when mucilaginous seeds are mixed with non-mucilaginous seeds in the proper proportions (our secret) they can be sprouted using traditional sprouting methods (like in French Garden, Italian Blend and Nick's Hot Sprout Salad)

Grow these on soil or Baby Blanket (soilless medium) in a Tray, on a Hemp Bag, a Miniature Garden or on virtually any moisture retaining medium (as minimal as paper towel or fabric - like cheesecloth) you can think of.

The Basics

Thoroughly moisten that upon which you are going to grow.
If using a Hemp Bag or a small bit of Baby Blanket or similar medium - lay it on a plate or in a pan or something so that you don't end up watering your counter. Likewise, if using a Tray, put it on a plate or in a solid (Drip) tray to capture water runoff.

Spread seeds sparsely on your thoroughly moistened medium/sprouter.
(there should be a bit of space around each seed but you are not expected to place them one at a time - just spread them out as much as you can and as evenly as you can*)

You may cover your seeds:
If planting on soil in a Tray use another tray - up side down.
If using a Miniature Garden you can slide the tray into the central unit for the first 2-3 days.
If using a Hemp Bag or similar medium - be creative.
It is not mandatory when growing mucilaginous Micro-Greens to cover them at all. Experiment for yourself and see what works best in your climate/location.

Place your Micro-Garden in a low-light, room temperature location (70° is optimal).

Keep the medium/sprouter moist - but not soggy - by watering or misting every day or two.

When your plants grow up and begin to shed their hulls they are ready for light so move them (if necessary) to a well lighted location.
If you go with sunlight be prepared to water more frequently. Room light will usually do quite nicely as well and will not dry out your medium as quickly.

Keep the medium/sprouter moist but not soggy by watering regularly.
Water from the side if possible to prevent injuring the tiny plants.

When your plants have open leaves and are green, they are done.

Harvest by cutting just above the medium upon which they have grown.

During the final 8-12 hours minimize the surface moisture of your plants - they will store best in your refrigerator if they are dry to the touch. So if you water try to keep the water off the plants - just water the medium.

Transfer your crop to a plastic bag or the sealed container of your choice - glass is good - and put them in your refrigerator - if you can keep from eating them all first.

Note: If using Single Harvest Pack and a Miniature Garden use the whole bag on 1 tray.

Or Use:

1-2 Tablespoons for our little 5” tray.
1/3-1/2 Cup for an 11inch x 11 inch square tray.
2/3-1 Cups for ours for an 11 inch x 22 inch tray.

The surest way to know what amount of seed to use: Spread dry seed on the bottom of your sprouter so that the seed is spread evenly and sparsely (about 1/16 - 1/8 of an inch of room between seeds is the goal, but don't sweat it, there is no way you can do that even close to exactly - it is just a goal!).

* The first time you grow these you might consider giving quite a bit of space to each seed just to familiarize yourself with the plants' habit.

Try this and learn: Plant 1 seed in a tiny pot - something as small as one inch square (bigger is OK too). Use soil for this and bury the seed 1/8 inch deep. Thoroughly moisten the soil before planting and keep the soil moist as it grows and keep it in the light once it emerges from the soil. You can grow this seed into a plant that has several leaves (it will take 3-4 weeks). This is a great way to learn more about plants in general and this seed in particular. You can eat the plant it tastes great! Now you know more about the potential of seeds. Awesome isn't it?!

©1993-2006
SPROUTPEOPLE^®
170 Mendell St.
San Francisco, CA 94124

Toll Free:
877/777-6887
(877/SPROUTS)

Container Shipment

View Still photo's

http://picasaweb.google.com/Sheephogan/Boxes#

Easygreen Kelp MSDS

Seed and Grain Technologies, inc.
Phone: (775) 537-2552
Mobile: (702) 319-1806
Fax: (775) 537-2553
E-mail: support@easygreen.com
Web: http://www.easygreen.com

MATERIAL SAFETY DATA SHEET

Date of issue 4-2009
Page 1 of 3
1. IDENTIFICATION

Product Name; Kelp
Chemical Name; Not Applicable.
Other Name/s; Various.
Distributors Name; Seed and Grain Technologies, inc.
Telephone Number (775) 537-2552
U. N. Number. None Allocated.
Dangerous Goods Class. None Allocated.
Secondary Risk. None Allocated.
Hazchem. Group. None Allocated.
Pack Group. None Allocated.
EPG. None Allocated.
Poisons Schedule. None Allocated.
Uses. Fertilizer for “Easygreen Seed Sprouter”

1.1 PHYSICAL DESCRIPTIONS/PROPERTIES

Appearance. Light Brown to Dark brown

Chemical Formula. Not applicable.

Odor; Characteristic of Seaweed

PH 9.5 to 11.5

Flammability Not flammable.

Solubility in Water. 100% through a 120 mesh filter

Lower Explosion Limit. No data available.

Upper Explosion Limit. No data available.

Bulk Density. No data Available.

Specific Gravity. No data available.

Melting Point. No data Available.

Boiling Point. No data Available.

Vapor Pressure. No data Available. Evaporation Rate. No data Available. Reactivity Data. No data available.


Page 2 of 3

1.2 OTHER PROPERTIES No Data Available

1.3 INGREDIENTS Concentrated and liquefied Ascophylum Nodosum Seaweed

Typical Analysis

Total Solids 85%
Phosphorus 0.15%
Calcium 1.4%
Total Nitrogen 0.75%
Potassium 5.16%
Magnesium 1%
Sodium 3%
Sulphur 0.82%
Boron 70 ppm.
Copper 6 ppm
Iron. 800 ppm.
Molybdenum. 600-700 g/kg
Cobalt. 12 ppm.
Zinc 30 ppm
Manganese 61.5 ppm

2. HEALTH HAZARD INFORMATION.

2.1 Health Effects.

Ingestion No data available.
Eye Contact. May cause irritation.
Skin Contact. May cause slight irritation.
Inhalation.

2.2 First Aid and Emergency procedures.

Ingestion. Rinse mouth .Drink copious amounts of water.
Seek medical advice.

Eye Contact. Immediately flush with plenty of water for at least
15 minutes. Seek medical advice.

Skin Contact. Immediately wash area with plenty of water.


Inhalation. Seek medical advice.

2.3 First Aid Facilities. Eye wash station.

2.4 Advice To Doctor. Treat Symptomatically.

2.5 Toxicity Data. Non Toxic, Fully Biodegradable

3 PRECAUTIONS FOR USE

3.1 Conditions to avoid

3.2 Personal protection Safety glasses & proper gloves.

Page 3 of 3

3.3 Special fire fighting procedures None

3.4 Flammability Not flammable

4 SAFE HANDLING INFORMATION

4.1 Storage/transport Suitable for any general storage area

4.2 Packaging/labeling

UN No Not applicable
Pack group Not applicable
Class Not applicable
Hazchem code Not applicable
Subs risk Not applicable
EPG No Not applicable
Shipping name “Liquid Kelp”
Hazard None

4.3 Spills & disposals

Spilled material Collect & use for intended purpose if possible
Disposal Dispose of in accordance with all local, state &
federal environmental regulations

4.4 Fire/explosion hazard
Fire/explosion None
Extinguishing media Use appropriate media for surrounding fire
Conditions

5 OTHER INFORMATION No data available

DISCLAIMER

The data and recommendations presented herein are based upon research of others and are
believed to be accurate. However, no warranty is expressed or implied regarding this data or the
results to be obtained from use thereof. Seed and Grain Technologies, inc., assumes no responsibility for the injury to customers or third party proximity caused by the material if reasonable safety procedures are not adhered to as stipulated in this data sheet.

EasyGreen ™ 777 Deposit Remover

Page 1

Seed & Grain Technologies, inc..
MATERIAL SAFETY DATA SHEET

SECTION I - PRODUCT INFORMATION
PRODUCT NAME: EasyGreen™ 777 - Deposit Remover

PRODUCT CLASSIFICATION: Water Soluble Mineral Cleaner
MANUFACTURER: EasyGreen 1171 Gold Dust Ln, Pahrump NV. 89048

TELEPHONE: 775-537-2552 EMERGENCY TELEPHONE: 702-461-2778

SECTION II - INGREDIENTS
HAZARDOUS INGREDIENTS:
The exact composition of this material is a trade secret.

SECTION III - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: None
FLAMMABLE EXPLOSIVE LIMITS % BY VOLUME: Lower: None
Upper: None
FIRE EXTINGUISHING MEDIA: CO2 or Dry Chemical
SPECIAL FIRE-FIGHTING PROCEDURES: None known
UNUSUAL FIRE AND EXPLOSION HAZARD: None known

SECTION IV - PHYSICAL DATA
BOILING POINT: 212 Degrees F.
SPECIFIC GRAVITY (Water=1): 1.02
SOLUBILITY IN WATER: Complete
MELTING POINT: Unknown
PH: <1 style="text-align: center;">Page 2

SECTION V - PRODUCT HEALTH HAZARD DATA (continued)
Eye - Flush eyes with water for at least 15 minutes holding lids apart to ensure complete irrigation. If irritation persists, consult physician.

SECTION VI - REACTIVITY DATA
STABLE: Yes
STABILITY CONDITIONS TO AVOID: Excessive heat or open flame.
INCOMPATIBILITY (Materials to Avoid): Strong oxidizers & alkalis, chlorates, nitrates.
HAZARDOUS DECOMPOSITION PRODUCTS: None known
HAZARDOUS POLYMERIZATION: Will not occur

SECTION VII - SPILL, LEAK OR DISPOSAL PROCEDURES
WASTE DISPOSAL METHOD: If spilled, contact local sewer authorities to neutralize pH.
PRECAUTIONS IN HANDLING AND STORING: Store indoors. Store away from strong reducing agents.
OTHER PRECAUTIONS TO BE TAKEN: None known

SECTION VIII - SPECIAL PROTECTION INFORMATION
VENTILATION REQUIREMENTS: Local Exhaust OK
PROTECTIVE EQUIPMENT:
Eye - Safety Glasses recommended.
Skin - Protective gloves recommended.
OTHER PROTECTIVE PRECAUTION: None
HMIS CODES: HEALTH: 1
FLAMMABILITY: 0
PHYSICAL HAZ: 0
_____________________________________________________________________________

Disclaimer
The exact composition of this material is a trade secret.
The information contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this Data Sheet are made without guarantee or representation as to results. We suggest that you evaluate these recommendations and suggestions in your own laboratory prior to use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase price of the material. Freedom to use any patent owned by anyone is not to be inferred from any statement contained herein.

WITH REGARD TO THE MATERIAL, SELLER MAKES NO WARRANTY OF ANY KIND WHATEVER, EXPRESS OR IMPLIED, AND ALL WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY SELLER.

DATE: 02/09 By WBU EPA# AQ -53D6667 C3 F48 E0381 Mainstream Engineering